1. <acronym id="l1wqr"></acronym>
      2. Welcome SANCHOW?CHEMICALS?CO.,?LTD HomePage!
        Serive Tel:13928160655
        +86-719-5716269
        Sanchow
        contact us
        CEO:Mr?Zhou
        Mobi:13928160655
        Tel:+86-719-5716269
        Fax:+86-719-5716329
        Mail:13597868869@163.com
        Addr:LIULIPING,?SHIYAN,?HUBEI?442716,?CHINA
        MR-2048
        Product Details

        TECHNICAL DATA

        SANCHOW RELEASE AGENT

        MR-2048

         

        INTRODUCTION

        SANCHOW release agent is the product of Sanchow Chemicals Co., Ltd for use in the molding of unsaturated polyester resins and vinylester resins.

        SANCHOW release agent is primarily recommended as internal release additive for use in those types of molding operations where external heat is applied during the curing cycle and are not recommended generally for room temperature curing systems.

        SANCHOW release agent is incorporated directly into the resin eliminating the need for an external mold release agent, improving resin flow and line speeds, reducing release agent cost on a utility basis when compared with other, more conventional internal release agents. An effective addition of SANCHOW release agent will not have any adverse affect on the curing and cured resin. It will not interfere with secondary operations such as decorating, silk screen printing, painting, bonding or plating. It can also protect ferrous metal molds from corrosion during storage. It is especially effective when used in low shrink polyester or vinylester resins which produce exceptionally smooth surfaces when cast.

        PROPERTIES

        Chemical Composition

        Proprietary synergistic blend of organic fatty acids and esters and amine neutralizing agent

        Effective Ingredients

        100%

        Physical Appearance

        Amber liquid

        Odor

        ammoniacal odor

        Density

        0.960g/ml @25C

        Viscosity

        100~200cps @25C

        PH, 1% in deionized water

        4~5 @25C

        Flash Point

        Non Flammable

        Solubility

        Miscible with UP and VE resins

        Shelf Life

        Minimum of one year

          

         

         

         

        All information given by us about our products is based upon our tests and experience. It is intended for use by persons having technical skill at their own discretion and risk, and we assume no liability in connection with their use.

         

         

        APPLICATION INSTRUCTIONS

        General: For best results, laboratory tests or pre-production trials should determine the optimum addition level. SANCHOW release agent is effective with a range of 0.5 to 1.5 parts per 100 resin by weight, excluding reinforcements, pigments and fillers. High amount of filler may require a higher percentage of internal release than the indicated maximum.

        Mixing: Mix into resin prior to addition of catalysts, fillers, and other resin additives.

        PERSONAL SAFETY AND FIRST AID   

        Health Hazards: MR-2048 causes burns to the eyes and skin. Undiluted, it is corrosive to rabbit skin. It has a low acute oral toxicity.

        Safety Precautions: Do not get it in the eyes or on the skin. Use rubber gloves and adequate eye protection.   

        First Aid: In case of contact, flush the eyes or skin immediately with plenty of water for at least 15 minutes. Remove contaminated clothing and shoes. Call a physician. Wash clothing before reuse.

        STORAGE AND HANDLING

        It should be stored in a cool dry place and kept closed to prevent contamination.

         

         

        Sanchow Chemicals Co., Ltd

        Add: Liulipin, Shiyan, Hubei 442716, China

        Tel: +86-719-5716269

        Fax: +86-719-5716329

        E-mail: 13597868869@163.com

         

        中文字幕在线一区精品,精品无码,午夜福利片国产在线,亚洲午夜福利视频

          1. <acronym id="l1wqr"></acronym>